Welcome To The All New Durable Safety Signs! - Use Code "New-Site" for 10% off Your First Order Nov1st-Nov 30th.
At Durable Safety Signs, we prioritize safety and quality to provide you with the best possible products. Here’s why we stand out:
To ensure your vinyl safety sign adheres securely and lasts as long as possible, follow these step-by-step instructions carefully. These guidelines will help you apply the sign to a variety of surfaces, maximizing adhesion and durability
Vinyl signs with permanent adhesive adhere best to smooth, clean, and non-porous surfaces. Here are the ideal surfaces:
Avoid applying vinyl signs to rough, porous, or heavily textured surfaces like brick, concrete, or unfinished wood, as they may not adhere well or could peel over time.
1. Surface Preparation
Clean the Surface: The surface must be clean, dry, and free from dust, grease, oil, or any contaminants that could interfere with adhesion. Use isopropyl alcohol and a lint-free cloth to thoroughly wipe down the area. If the surface is greasy or dirty, clean it first with a mild soap and water solution, then follow with alcohol to remove any remaining residue.
Dry the Surface: Allow the surface to air dry completely or use a dry cloth to ensure no moisture remains. Moisture can affect adhesion.
2. Position the Sign
Mark the Location: Hold the sign up to the desired position and use masking tape or painter's tape to mark the top edge. This will act as a guide to ensure the sign is level.
Alignment: Double-check that the sign is straight and centered by stepping back and viewing it from different angles.
3. Peel the Backing
Partial Peel for Large Signs: For larger signs, peel back the top edge of the backing paper (about 1–2 inches), exposing the adhesive. Leave the rest of the backing intact to prevent the sign from sticking prematurely.
Complete Peel for Small Signs: For smaller signs, you can remove the entire backing paper in one step.
4. Initial Application
Align and Apply: Align the top of the sign with the marked guide and gently press down on the exposed adhesive area, ensuring it sticks to the surface. For larger signs, use the partial-peel method and smooth down the top part before peeling more of the backing.
Smooth It Out: As you apply the sign, use a squeegee or soft cloth-wrapped card to press down the vinyl, starting from the center and working outward. This will help avoid air bubbles and wrinkles. Gradually peel away the rest of the backing paper while applying even pressure across the surface.
5. Remove Air Bubbles
Squeegee Out Air: Once the entire sign is applied, use the squeegee or soft cloth to firmly press down the vinyl, moving from the center to the edges in smooth strokes. This helps remove any trapped air bubbles. If air bubbles persist, use a pin or needle to puncture the bubble and gently press the air out.
6.Final Press and Trim
Reinforce Adhesion: Apply additional pressure to the edges of the sign to ensure a secure bond. Go over the entire sign one more time with the squeegee to maximize contact between the adhesive and the surface.
Trim Excess (if necessary): If the sign extends beyond the desired area, use a utility knife or scissors to carefully trim the excess vinyl.
7.Curing Time
Wait Before Exposure: For the best results, allow the adhesive to fully cure by waiting at least 24 hours before exposing the sign to moisture, extreme temperatures, or heavy cleaning. This ensures the adhesive bond strengthens over time.
Temperature: Apply the vinyl sign when the surface temperature is between 50°F and 90°F (10°C to 32°C). Extreme cold or heat can affect the adhesive's ability to bond properly.
Avoid Textured or Porous Surfaces: Surfaces such as brick, unpainted wood, or rough concrete will not provide good adhesion, causing the sign to peel over time.
Cleaning and Maintenance: To maintain the sign’s appearance and adhesion, clean the area around the sign regularly with a mild soap solution and avoid using harsh chemicals that can damage the adhesive.
Humidity: Avoid applying the sign in extremely humid conditions as moisture in the air can interfere with the adhesive bonding process.
To ensure your vinyl safety sign remains in excellent condition and adheres securely over time, follow these simple care tips:
Our durable safety signs are crafted from high-quality 3M materials and backed by permanent adhesives. These materials are chosen for their longevity and resistance to environmental factors like UV rays, moisture, and extreme temperatures, ensuring the signs remain visible and intact over time.
Yes, all our safety signs adhere to relevant industry standards, including OSHA (Occupational Safety and Health Administration) and ANSI (American National Standards Institute) guidelines. We ensure that the signs meet the required specifications for colors, symbols, and wording to effectively communicate safety messages.
Absolutely! We offer customization options to include specific messages, symbols, or your company logo. Our design team can work with you to create signs that meet your exact requirements while maintaining compliance with safety regulations. Contact one of our safety experts to day to discuss your sign needs.
Our outdoor safety signs are designed to be weather-resistant and durable. They are treated with protective coatings to resist fading, corrosion, and damage from elements like rain, wind, and sunlight, ensuring they remain effective in harsh outdoor environments.
The lifespan of our durable safety signs can range from 5 to 10 years, depending on the material and environmental conditions. With proper installation and maintenance, they are built to provide long-lasting visibility and safety communication.
Super-fast shipping. I had to update the order as soon as I placed it. I called them as soon just after I hit send and they were supper easy to work with to update my order.
Easy purchase experience. Got my order ahead of schedule.
Will definitely order again. Can't beat the price.
If for any reason your sign does not perform optimally you can return it, no question asks for a full replacement.
©2024 Durable Safety Signs
4300 River Rd. Springfield, OH 45502